LS1GTO.com Forums banner

1 - 13 of 13 Posts

·
Yes my name is Holden
Joined
·
489 Posts
Greetings Mr Ls2; I'm interested. But don't hold them for me. Are we friends on FB? Ole' Bob.
 

·
Registered
Joined
·
206 Posts
These are made by Morel.
 

·
2006GTO M6 dd-drag-roadcourse
Joined
·
1,505 Posts
PM sent sir
 

·
Yes my name is Holden
Joined
·
489 Posts
Greeting Mr Ls2 & all; Well I did do a bit of research on these as they interested me a bunch. Lunati site doesn't say much about this product, 6200-6500 RPM working range! They would suit my Re-Fresh plan Perfectly. So did GTO44 buy them or they still up? The other info I found was a re design somewhere between 2012 & now as the step down area (mid band) is machined differently. Cost savings, oil flow, weight? Small difference but it's their. So does that mean something was also changed inside, for better or worse? And the feather that really got my attention was (3 sources) Short Travel .020"-.040", .030" Sweet spot. And yes 99% chance they were made by Morel (all second hand info) For me it's all about mass vs Plastic, OE vs aftermarket. Anyway can ya post the paper work that came with them, if ya still got them. Thanks for your time Ole' Bob.
 

·
2006GTO M6 dd-drag-roadcourse
Joined
·
1,505 Posts
Yes i got them, just waiting confirmation.
 

·
Yes my name is Holden
Joined
·
489 Posts
Ah, you did Good, & I did your research or you're faster than me! Another tid bit, one fella has been buzzing 7000 with these & he wondered why the talk about 6500 limit. And I'm sure that you have heard this before, but be Very careful of push rod length. If what I found is true you only have a small window of range. Please post up any paper work as I'm curious what Lunati recommends. Oh when ya got it apart Clean, Clean & consider a bit more ZDDP in your oil, Ole' Bob.
 

·
2006GTO M6 dd-drag-roadcourse
Joined
·
1,505 Posts
(y)(y)
 
1 - 13 of 13 Posts
Top