LS1GTO.com Forums banner

1 - 3 of 3 Posts

·
Owns 3 GTO's
Joined
·
16,515 Posts
Discussion Starter #1
HI Gene. Loking for a little help. Working on a project. Putting an LS-1 into my '99 Sonoma. I am in the process of putting on a Corvette (LS-1,6 style) accessory drive setup on the engine. I have the brakets and all the accessories. But I am not going to use "off the shelf" bolts. I want GM bolts. So below is a list of bolts I need. Was wondering if you could help me out in obtaining them.

Thanks

Main accessory braket to engine, 4 bolts.

Alternator to accessory braket. 2 bolts.

Power steering pump to accessory braket. 2 bolts.

Water pump bolts. 6 bolts.

Tensioner to water pump bolts. 2 bolts.

A/C compressor to braket, and braket to engine. 5 bolts.

Also looking for the short drain hose from the power steering tank to pump as well as the tank, mounting braket, and hardware to mount it.
 

·
Missing my little one.
Joined
·
21,341 Posts
Hey Kurt!

I don't know how often this section is checked by the vendors, might want to send Gene a PM if you don't get an answer in a few days.
 

·
Owns 3 GTO's
Joined
·
16,515 Posts
Discussion Starter #3
Not sure either. I'm not in a rush. But like you said, it might be a while. So I'll just copy the post and PM it to him. Thanks Ryan.
 
1 - 3 of 3 Posts
Top