LS1GTO Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
662 Posts
Discussion Starter #1
Greetings!

I am trying to decide the best route to go for my setup and I would really appreciate any advice anyone has!

I have an 04 gto(LS1), M6, 3.91, LT, corsa, 100-150 shot, CAI. I have just got some ls6 heads from a 05 gto and looking at a cam/spring kit and minor head porting, and possibly rockers if you think they are worth it.

I have head a lot of good things about the HPE S-cam(238/242 608/612 115LSA) but I am curious if there is a better cam for N20 and stock or minor ported ls6 heads.

Any suggestions about what cam or who could port heads cheap in tx?

Thanks!!
Walt
 

·
Owns 3 GTO's
Joined
·
16,515 Posts
Send them to Bob at presision Porting. Sponcer to the left. He does a great job. Either that, or buy a set of heads already ported. As for the cam. Not sure.
 

·
Administrator
Joined
·
20,425 Posts
that cams a little aggressive for an LS1, just an opinion
 

·
485, 432 rw m6
Joined
·
536 Posts
Hey Walt, HPE has changed the s-cam to 238-240-112 lsa. 600-609 lift.
Mike
 
1 - 4 of 4 Posts
Top