LS1GTO.com Forums banner

201 - 220 of 254 Posts

·
3800lbs of slow
Joined
·
738 Posts
Part number for the radiator cover? My car is missing it. :(
 

·
Chicago Holden Connection
Joined
·
1,212 Posts
thanks!!!
 

·
VIOLET FOREVER
Joined
·
8,773 Posts
substitute gas cap: Stant #11839. 2 cold start cycles in the last 36 hours with no EVAP codes, in fact no dash idiot lights at all. $9.99 at Pep Boys
This is incorrect.

While it may work it IS NOT their direct replacement. That part # would be #10841 and a NAPA # of 703-1636 and a Gates # of 31843

Covers the following GM # S
10326373 10326375 10326377 10330409 10331673 10346666 10352662
10372244 10372246 10372296 10372866 10372868 15129989 15200676 15225005 15225006 22728999 96554034
 

·
Hybred Gto
Joined
·
185 Posts
this may be dumb but is there an actual parts book with all the part numbers in it. i have seen them for other cars. but can not find them for our cars...
 

·
Still a communist state
Joined
·
12,479 Posts
#12560961 valve rocker arm pivot support bolt
 

·
None
Joined
·
310 Posts
I need the part number for the glove box.
 

·
Registered
Joined
·
8 Posts
Parts Books

this may be dumb but is there an actual parts book with all the part numbers in it. i have seen them for other cars. but can not find them for our cars...
The official publisher of GM Owners Manuals, Service Manuals and Parts Manuals is Helm Inc. http://www.helminc.com There is no listing of any parts information. The only source of accurate information is the dealers Electronic Parts Catalog.:D
 

·
Registered Gator
Joined
·
506 Posts
Looking for the following Part Numbers...

1) # for the LS2 intake to cylinder head gasket (need 8 total) , I see #12580833 from a earlier post but it doesn't work...

2) # for intake manifold bolts (looks like ten total)...

3) # for MAP sensor and # for it's grommet (Helms indicates both).

4) # for plastic Pontiac Wheel center cap (my tire place tells me the msrp is over $100 - is this for one or all four. Over $400 msrp for all four center caps seems very excessive).

Thanks for your time...
 

·
Summer Tires in snow FTW
Joined
·
1,320 Posts
Looking for part # for door look plastic molding and red clip (door lock knob) for the driver side.
 

·
Registered Gator
Joined
·
506 Posts
Looking for the following Part Numbers...

1) # for the LS2 intake to cylinder head gasket (need 8 total) , I see #12580833 from a earlier post but it doesn't work...

2) # for intake manifold bolts (looks like ten total)...

3) # for MAP sensor and # for it's grommet (Helms indicates both).

4) # for plastic Pontiac Wheel center cap (my tire place tells me the msrp is over $100 - is this for one or all four. Over $400 msrp for all four center caps seems very excessive).

Thanks for your time...

I quote myself to match questions I found answers to :

1/2) Still looking for the part number for the intake to cylinder head gaskets (it takes eight of these rectangular gaskets) and the bolt numbers - Quess I'll need to drop by the Pontiac Dealership.

3) I ordered one from Gene and the grommet is included - the part number is : 16212460 .

4) I also ordered one from Gene and yes these are individually priced. One wheel cap per part ordered - so they are expensive , # is 92155956 and they are made in OZ...
 

·
Better lucky than good!
Joined
·
396 Posts
Part number for the 4 small oval keepers/guides on the block and heads.....they kinda look like mini metal toilet roll cylinders.
 

·
Still a communist state
Joined
·
12,479 Posts
12577215 valve cover bolt assembly
 
201 - 220 of 254 Posts
Top