LS1GTO Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
88 Posts
Discussion Starter #1
I decided to run separate lines for my drag bags (left + right) and I ran out of 1/4" tubing with the kit. A few trips to hardware stores / Depot / Lowes resulted in suck-a$$ tubing that is bleeding pressure. Any suggestions on where to buy 1/4" OD tubing that wont leak?

Thx.
 

·
Beer Geek
Joined
·
3,713 Posts
For 1/4" ID you could try NAPA, fuel hose is usually rated to 30 some pounds. 1/4" OD is pretty small.
 

·
Registered
Joined
·
88 Posts
Discussion Starter #3
swmn said:
For 1/4" ID you could try NAPA, fuel hose is usually rated to 30 some pounds. 1/4" OD is pretty small.
Thanks. 1/4" OD is what came with the drag bags. All of the fittings on the shrader valve, bag, couplers, etc are for that size tubing so I would like to find the same guage if possible.
 

·
Registered
Joined
·
88 Posts
Discussion Starter #6
vettediver said:
Call BMR they will gladly send you all you want!!

Called BMR. "NO GOOD".
Called a contractor buddy and he is hooking me up with some 120 PSI 1/4" tubing from a jobsite. :burnout:

Thanks for the responses guys. :cool:
 
1 - 6 of 6 Posts
Top