LS1GTO Forums banner

1 - 1 of 1 Posts

·
3Deucesanda5speedanda455
Joined
·
411 Posts
Discussion Starter #1
Just wanted to let you guys know that a handle from an F body Pro 5.0 is a direct bolt on in place of the factory handle. No re drilling holes and even the cap bolts from the Pro 5.0 fit!

The stock Pro 5.0 is a bit tall so I am going to get a Lou's for it.

The shifting feels better without that rubber donut in it. I used the white Hurst cue ball from my Formula on it, and it feels great. It's still not as good as the Pro 5.0, but improves the stock shifter enough that I am satisfied, at least until a reasonably priced aftermarket (Pro 5.0, B&M etc....) comes out for the car.
 
1 - 1 of 1 Posts
Top