LS1GTO Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
67 Posts
Discussion Starter · #1 ·
OK, so I installed an Alpine IVA-W200 HU. My question is I want to install a custom single 12 inch sub in the trunk. I know the simple things such as power, ground, and remote are needed to power the amp (thus power the sub). So the only thing I wonder is can I just hook the sub up to the amp and run my RCA's to my Sub outs on my HU? Or do I need line converters?

My main accomplishment is to hook a sub to my HU so that I can control bass power threw my HU.

Thanks for the help in advance.

John
 

·
Where are the women and booze
Joined
·
2,089 Posts
uh, with a new radio just connect the RCAs from the sub out of the headunit to the input of the amp. LOCs are only if you are using a deck w/o RCA preamp outs (i.e. a factory unit).

Am I missing another part of the question?
 

·
Registered
Joined
·
67 Posts
Discussion Starter · #3 ·
Nope that should do it...thanks man...just wanted to make sure my sub will have the signal....Like I said before easy question :)
 
1 - 3 of 3 Posts
Top