LS1GTO Forums banner

1 - 2 of 2 Posts

·
Dismembered
Joined
·
4,339 Posts
Discussion Starter #1
So, is this possible? I was hoping I could use an aftermarket guage (specifically the Autometer Ultralite) with the stock oil sending unit....
 

·
Administrator
Joined
·
9,489 Posts
Nope. The factory sending unit is an input to the ECU so you can't disconnect it or tap into it as that will alter the oil pressure signal and trigger a warning.
You need to install an additional sensor either in an alternate location (not sure where there is one) or in the stock location with a "T" to keep the factory one.
 
1 - 2 of 2 Posts
Top