LS1GTO Forums banner
1 - 6 of 6 Posts

·
Registered
2004 GTO H/C/I. 430whp (hub dyno)
Joined
·
202 Posts
Discussion Starter · #1 ·
I recently purchased a new to me built 04 gto. Well it had a tick that only got worse with the rpms. So I looked into it. Found that one of the rockers on cylinder 7 ( where the noise was coming from ) had a loose/ broken snap ring. These are comp cams snap rings.
 

Attachments

·
Administrator
Joined
·
9,502 Posts
I didn't put these in I just happen to hear a tick. And investigated. That's what I found.
He was just making a general observation.
 

·
The Entenmann's Shim-Sham
Joined
·
12,745 Posts
You may want to disassemble the rocker and inspect the trunion for wear. The Comp trunions are known to wear out prematurely.
 
1 - 6 of 6 Posts
Top