LS1GTO Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
309 Posts
Discussion Starter · #1 ·
How lean should I be aiming for when getting a pseudo lean cruise tune established?
Right now the wb is reading right around stoich, varying a bit each way. Is it safe to go leaner under light/steady throttle conditions between 1600 and 2k rpm and 50kpa on the MAP?
 

·
Administrator
Joined
·
20,930 Posts
I have an 04 so I get the real lean cruise from the PCM.
You can go pretty much as lean as you want, under very low MAP settings.
I keep mine in the 1600-2400 range, .32G/cyl and lower. Tapering off to the sides, and higher in the MAP region.

My wideband reports anything from 18:1 to 15.5:1 when in lean cruise, depending on which cell I am in.


edit:
one thing to keep in mind, with you doing psuedo lean cruise, you may have some throttle transistion problems at low speeds, so keep an eye on it.
 

·
Registered
Joined
·
309 Posts
Discussion Starter · #3 ·
It sure would be a lot easier if LS2's had that ability that the 04's do...but now I know where to start at least, thanks for the input!
 
1 - 3 of 3 Posts
Top