LS1GTO Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hey guys my dad just bought an 04 GTO and wants a good short throw. He asked me to help him find a good one but I dunno much about them since I'm a more of a mustang guy. I was asking all the F-Body guys since they have a Tremec 6spd as well but they sent me here. So far the F-Body guys have told me Pro 5.0. What do you guys think? Thanks in advance. :cool:
 

·
Expelled
Joined
·
8,316 Posts
so far i think ripshift is the only way to keep the stock knob, but some have changed the stick and knob check this out i will also be trying a setup i found on ebay for $40 bucks.

http://www.ls1gto.com/forums/showthread.php?t=1648&highlight=shifter+solved.

On Blitzu's correct me if im wrong he used a Austin qwik shaft measured at 6 1/2in.

The shaft im trying is 6in long. Will have pics later this week.

Shag in this thread,
http://www.ls1gto.com/forums/showthread.php?t=6022&highlight=shifter+changed

He said the stock shaft was 6.25in while he made one that was 4in. But he said he really didnt like it that low.
 
1 - 5 of 5 Posts
Top