LS1GTO Forums banner

emergency on pedders install....

809 views 2 replies 3 participants last post by  ESCGOAT  
#1 ·
Doing a backhalf repair job today. Got to the rear sway bar d bushings. What is the trick to getting the bolt off. What size is it and will one of the bent wrenches work? Also, is there a nut on the bottom or is it just a bolt into a welded plate.
 
#2 ·
It is a self tapping bolt with a 13mm head.
 
#3 ·
If you haven't installed a differential insert and plan to I would wait and do both at the same time. Getting a wrench or ratchet up in there is nearly impossible. When you remove the bracket to install the diff insert, you will have plenty of room to work.